Engineer's scale


Table of Contents

Read here about a type of scale. The relevance of this "scale" to the broader concern of "scale" as an "order of magnitude" is discussed.

Overview

The Engineer's scale is a ruler-like device similar to the Architect's scale, they are helpful when drawing rooms.

An engineer's scale is a tool for measuring distances and transferring measurements at a fixed ratio of length. It is commonly made of plastic and is just over 12 inches (305 mm) long, but with only 12 inches of markings, leaving the ends unmarked so that so that the first and last measuring ticks do not wear off. It is used in making engineering drawings, commonly called blueprints, in scale. For example, "one-tenth size" would appear on a drawing to indicate a part larger than the paper itself. It is not to be used to measure machined parts to see if they meet specifications.
In scientific and engineering terminology, a device to measure linear distance and create proportional linear measurements is called a scale. A device for drawing straight lines is a ruler. In common usage both are referred to as a ruler.
In Canada and the United States, this scale is divided into decimalized fractions of an inch, but has a cross-section like an equilateral triangle, which enables the scale to have six edges indexed for measurement. One edge is divided into tenths of an inch, and the subsequent ones are directly marked for twentieths, thirtieths, fortieths, fiftieths, and finally sixtieths of an inch.
The engineer's scale came into existence when machining parts required a greater precision than the usual, binary fractionalization of the inch as in the architect's scale for houses and furniture. They were used, for example, in laying out printed circuit boards with the spacing of leads from integrated circuits as one-tenth of an inch.

Rule_Engineer's_scales_presented_to_George_Turnbull_in_Monghyr,_India_1857._Publid_Domain..png
Engineer's scales presented to George Turnbull in Monghyr, India 1857. The leather case has the black-ink inscription: "This Box of Scales was presented to me by Mr Metford at Monghyr in 1856 or 1857. G. T." The triangular scales are engraved: "METFORD'S ENGINEERS POCKET SCALES" and "THOs D KING BRISTOL" Public Domain.

Usage

The engineer's scale is a type of proportional scale, one example of how one scale is mapped onto another scale.